<form id="vrefx"></form>

    <nobr id="vrefx"></nobr>

    <nav id="vrefx"><listing id="vrefx"></listing></nav>

    • 18764172899
      0531一85977876

    • [field:companyname]
      全國咨詢熱線
    當前位置:首頁 - 新聞資訊 > 常見新聞 >

    斷橋鋁門窗設備辨別要注意什么?

    來源:http://www.thinkgreeninitiative.com/ 發布時間:2022-01-19
    因為近年來,隨著科學技術和工業經濟的快速發展,對鋁合金焊接結構件的需求不斷增長,對鋁合金焊接性的研究也越來越深入。鋁合金是業內使用最廣泛的有色金屬合金之一,廣泛應用于航空,航天,汽車,機械,船舶和化學工業。
    In recent years, with the rapid development of science and technology and industrial economy, the demand for aluminum alloy welded structural parts is growing, and the research on the weldability of aluminum alloy is becoming more and more in-depth. Aluminum alloy is one of the most widely used non-ferrous alloys in the industry. It is widely used in aviation, aerospace, automobile, machinery, shipbuilding and chemical industry.
    材料:鋁型材適用于優質鋁合金門窗,厚度,強度和噴涂顏色(一般噴涂,氟碳噴涂,電泳噴涂)等,必須符合國家相關標準,壁厚大于1.2毫米,抗拉伸力為每平方米157牛頓,屈服強度為每平方毫米10 8牛頓,氧化膜厚度應為10微米。如果不符合上述標準,則是不合格的鋁合金門窗,不能使用。
    Material: aluminum profile is applicable to high-quality aluminum alloy doors and windows. The thickness, strength and spraying color (general spraying, fluorocarbon spraying, electrophoretic spraying) must comply with relevant national standards. The wall thickness is greater than 1.2mm, the tensile strength is 157 Newtons per square meter, the yield strength is 108 Newtons per square millimeter, and the thickness of oxide film shall be 10 microns. If the above standards are not met, the aluminum alloy doors and windows are unqualified and cannot be used.
    鋁合金門和破碎橋窗的墊片通常用于PVC墊片,尼龍66墊片(分為進口和國產)和橡膠墊片(這種絕緣方法不符合國家標準)。提醒大家選擇絕緣條的類型。
    數控門窗設備
    The gaskets of aluminum alloy doors and broken bridge windows are usually used for PVC gaskets (limited by the state), nylon 66 gaskets (imported and domestic) and rubber gaskets (this insulation method does not meet the national standards). Remind everyone to choose the type of insulating strip.
    加工:斷橋鋁門窗設備,優質鋁合金門窗,精加工,安裝,耐壓,密封性能好,免開關。劣質鋁合金門窗,盲目選擇鋁型材和規格,加工硬加工,切削代替銑削,不需要安裝,吊頂性能不好,開關不自由,風雨和玻璃爆破只是現象當涉及到外力時,很容易擠壓或敲擊推拉部件或玻璃,造成人身傷害。
    Processing: Bridge broken aluminum doors and windows equipment, high-quality aluminum alloy doors and windows, finishing, installation, pressure resistance, good sealing performance, switch free. Poor quality aluminum alloy doors and windows, blindly select aluminum profiles and specifications, process hard processing, cutting instead of milling, do not need to be installed, the ceiling performance is poor, the switch is not free, wind and rain and glass blasting are just phenomena. When external forces are involved, it is easy to squeeze or knock push-pull parts or glass, causing personal injury.
    價格:在正常情況下,由于生產成本高,優質鋁合金門窗比劣質鋁合金門窗貴30%。一些鋁合金門窗的壁厚僅為0.6-0.8毫米,其抗拉強度和屈服強度遠低于國家標準,使用不安全。此外,建議使用常規的鋁合金門窗制造商產品,不符合標準的產品不易滿足。
    Price: under normal circumstances, due to the high production cost, high-quality aluminum alloy doors and windows are 30% more expensive than low-quality aluminum alloy doors and windows. The wall thickness of some aluminum alloy doors and windows is only 0.6-0.8mm, and their tensile strength and yield strength are far lower than national standards, which is unsafe to use. In addition, it is recommended to use the products of conventional aluminum alloy door and window manufacturers, and the products that do not meet the standards are not easy to meet.