<form id="vrefx"></form>

    <nobr id="vrefx"></nobr>

    <nav id="vrefx"><listing id="vrefx"></listing></nav>

    • 18764172899
      0531一85977876

    • [field:companyname]
      全國咨詢熱線
    當前位置:首頁 - 新聞資訊 > 行業新聞 >

    門窗設備調試需要從哪些方面出發?

    來源:http://www.thinkgreeninitiative.com/ 發布時間:2022-01-06
    第一,電力方面。電壓380V是一般的門窗機械設備的正常的電壓,電壓一定要穩定,線路盡量不會影響設備使用和人員操作,地面線路要用護罩保護。
    First, power. The voltage of 380V is the normal voltage of general door and window mechanical equipment. The voltage must be stable. The line will not affect the use of equipment and personnel operation as far as possible. The ground line shall be protected with a shield.
    第二,供氣方面。由于門窗設備的壓料要保證充足的供氣量,這樣就能更好的使用了,這是基礎,來實現氣缸壓緊。正常情況下,門窗設備的供氣量和氣壓都是有固定的參數要求的,即供氣流量要達到0.3,氣壓也要能夠達到8個壓。在有多個門窗設備的情況下,這就需要多準備一些儲氣罐,這個根據現實情況而定。如果氣壓達不到,門窗加工設備的精確度就會進出產生相應的一些影響,相應地加工效果也會發生一些偏離預想的現象。
    Second, gas supply. As the pressing of door and window equipment should ensure sufficient air supply, it can be used better. This is the basis to realize cylinder pressing. Under normal circumstances, the air supply volume and air pressure of door and window equipment have fixed parameter requirements, that is, the air supply flow should reach 0.3 and the air pressure should also reach 8 pressures. In the case of multiple doors and windows, it is necessary to prepare more air tanks, which depends on the actual situation. If the air pressure is not reached, the accuracy of door and window processing equipment will have a corresponding impact, and the processing effect will deviate from the expected phenomenon.
    斷橋鋁門窗加工設備
    第三,設備方面。斷橋鋁門窗設備種類很多,每一種設備又會有多種型號,或者多種設備部位不同等等。所以在門窗設備的安裝調試方面,需要協調好各個區域的工作,把握好每一個細節。
    Third, equipment. There are many kinds of broken bridge aluminum door and window equipment, and each kind of equipment will have a variety of models, or a variety of equipment parts are different, etc. Therefore, in the installation and commissioning of door and window equipment, it is necessary to coordinate the work of each area and grasp every detail.
    第四,空間方面,在設備使用場地,要合理安排設備擺放位置,做到從原材料的存放和鋸切加工到成品門窗出廠一條龍,不要出現東邊下料還需要去西邊搬運材料的問題。
    Fourth, in terms of space, in the equipment use site, it is necessary to reasonably arrange the equipment placement position, so as to achieve a one-stop process from the storage and sawing of raw materials to the delivery of finished doors and windows, and avoid the problem of blanking in the East and transporting materials in the West.
    第五,安全方面。要做到設備專人專用,并張貼設備的安全使用規范和出現安全事故的處理方法。
    Fifth, security. Special personnel shall be specially assigned to use the equipment, and the safe use specifications of the equipment and the treatment methods of safety accidents shall be posted.
    第六,設備維護。設備的維護要專人進行,維護前一訂要停電停氣。每天使用完畢,清理設備和碎料,并檢查設備有無異常。
    Sixth, equipment maintenance. The maintenance of equipment shall be carried out by special personnel, and the power and gas shall be cut off before maintenance. After use every day, clean the equipment and debris, and check whether the equipment is abnormal.
    以上就是斷橋鋁門窗加工設備給大家的精彩內容,更多的精彩內容請點擊:http://www.thinkgreeninitiative.com我們后續會有更多的精彩內容等您查看.
    The above is the wonderful content of the broken bridge aluminum door and window processing equipment. For more wonderful content, please click: http://www.thinkgreeninitiative.com We will have more wonderful content for you to check later