<form id="vrefx"></form>

    <nobr id="vrefx"></nobr>

    <nav id="vrefx"><listing id="vrefx"></listing></nav>

    • 18764172899

    • [field:companyname]
    當前位置:首頁 - 新聞資訊 > 公司動態 >


    來源:http://www.thinkgreeninitiative.com/ 發布時間:2022-02-23
    Doors and windows are often used in our daily life. Broken bridge aluminum doors and windows equipment is an indispensable equipment in the production and processing of doors and windows, which brings convenience to the production and processing of doors and windows. In daily work, equipment maintenance is very important. Do you know how to maintain the broken bridge aluminum door and window equipment? Let's have a look.
    Clean the dirt of the machine tool and guide rail in time every day to keep the bed clean. Regularly check the components and fasteners of each mechanism to prevent loosening, and regularly check whether the equipment is grounded firmly. The working surface and jaws of the positioning plate and the upper and lower pressing tongs shall be kept clean and free of oil stain, and shall be wiped every shift. Timely remove the debris on the sawing machine to ensure the accurate action of electrical components.
    Each sliding mechanism shall select oil-free lubricating bearing or linear motion bearing, pay attention to observe whether there is lubricating oil on the horizontal and longitudinal guide rails and rack surfaces of the machine, and lubricate all parts regularly. The power supply system at the site where the equipment is located shall be maintained regularly, and the cable joints shall be reliably insulated and wrapped with adhesive tape. The Teflon welding cloth is wrapped on the heating plate and should be replaced regularly. Regularly check the performance of all buttons and selector switches, and replace them in time if they are damaged.
    Clean up the debris falling on the sawing machine in time to ensure the accurate action of electrical components. The filter element and water storage cup of the water separation air filter in the air source processor shall be cleaned and drained regularly. The electric box shall be kept clean and dry, and there shall be no wet or corrosive gas around it to avoid damaging the equipment. If long-term sealing is not used, rust prevention treatment shall be carried out before packaging to avoid corrosion.
    The above is the knowledge brought to you today. CNC door and window equipment has focused on the industry for many years and continuously provides users with valuable content. Please continue to pay attention to us for more content: http://www.thinkgreeninitiative.com